Photogenic Professional Lighting   Products - Flash Monolights - PowerLight Monolights - PLR1250DR
PLR1250DR
958446

PowerLight® monolights are built to meet the everyday demands of photo professionals. Their job is a lot like yours: to provide exact and repeatable results in demanding lighting situations, day in and day out.
The PLR1250DR has a 6 f-stop flash output range from 16 to 500Ws. The unit delivers accurate, repeatable power to the flash tube every flash, for consistent exposures. At full power it has a short 1/1300 sec. flash duration. Tight control of the flash output is accomplished through a digital display that allows for precise adjustments in 1/10 or 1/2 f-stop increments. Just like the flash, the bright 250W modeling lamp can be controlled to any output level you need—full, proportional, manual or off. The flash tube is user replaceable.
You can throw away your sync cord—the PLR1250DR has a built-in PocketWizard™ receiver. Any PocketWizard™ transmitter you use will trigger the light from a distance up to 300 feet. Plus, there’s no antenna to break off (it’s in the handle), and there are no batteries to worry about (the power comes from the light).
When you purchase a PowerLight, you gain the creative freedom that comes from having dozens of compatible light modifiers to choose from: soft boxes, umbrellas and the entire Quick-Change line, including those legendary Photogenic reflectors.
Professionals trust Photogenic PowerLights for rugged build, consistent output, and reliable results.
See kit options for this light at the PL2 Kits Page.

ALTERNATIVE VIEWS:

      ENLARGE IMAGE
PRODUCT SPECIFICATIONS:
WEIGHT 5 lbs. 8 oz.
DIMENSIONS 4.5" x 4.5" x 6.75"
UNIT PLR1250DR
OUTPUT POWER 16 to 500Ws (6 f-stops)
FLASH DURATION 1/1300 sec. at full power, 1/640 sec. at 1/32 power
RECYCLE TIME 1.5 sec. at full power, 0.5 sec. at 1/32 power
POWER CONTROL digital control in 0.1 or 0.5 f-stop increments
MODELING POWER 250-watt Quartz ESS lamp
TRIGGERING Photo slave, Sync jack (5 Vdc), Test button, Radio
POWER SUPPLY 105–125 Vac, 60hz, 10 amp. Line voltage regulated.
OVERLOAD PROTECTION 3AG type 15 amp SLO-BLO fuse, and thermal protection
POWER CONSUMPTION 0.2 amps idling, 15 amps charging
VOLTAGE STABILZATION ±0.05 f-stop
IS0 100 GUIDE NUMBER 365 w/PL7R reflector, 110 w/o reflector
CONSTRUCTION Extruded aluminum housing
RELATED PRODUCTS:
Copyright 2005 Photogenic Professional Lighting. All rights reserved.
Legal Notices & Terms of Use   |   Privacy Policy
HOME | COMPANY | PRODUCTS | TESTIMONIALS | CUSTOMER SERVICE
LOCATE DEALER | CONTACT US | SITE MAP