Photogenic Professional Lighting   Products - Flash Monolights - Solair Monolights - PLR500DRC
PLR500DRC
958491

Solair monolights employ “constant color” technology that prevents the flash color temperature from visibly shifting no matter what power setting is used. There’s no warm cast at lower power levels! That’s important in a multi-light setup, where levels can vary greatly.
The PLR500DRC provides an extended range of flash output from 500Ws to 4Ws (an 8 f-stop range). The digital display lets you precisely adjust the flash power setting in 1/10 or 1/2 f-stop increments. Microprocessor circuitry ensures the power level you select is delivered accurately, flash after flash, to within 1/20 of an f-stop. The light has a bright 250W modeling lamp that can be fully controlled to any output level you need.
The PLR500DRC has the convenience of wireless triggering: a PocketWizard Plus receiver with a hidden antenna is built right in. The receiver is powered by the light unit, so there are no batteries to replace. Any PocketWizard transmitter can trigger these lights up to a distance of 300 feet.
Exposure bracketing can be automatically performed with the Solair light, instead of with the camera. An under- and over-exposure power setting of as little as 1/10 f-stop up to as much as 1-1/2 f-stops can be programmed to fire in addition to the correct exposure setting. Keep your depth-of-field unchanged!
Professionals trust Photogenic Solair monolights for constant color, consistent output,
and reliable results.
See kit options for this light at the Solair Kits Page.

ALTERNATIVE VIEWS:

      ENLARGE IMAGE
PRODUCT SPECIFICATIONS:
WEIGHT 5 lbs. 8 oz.
DIMENSIONS 4.5" x 4.5" x 6.75"
UNIT PLR500DRC
OUTPUT POWER 3.9 to 500Ws (8 f-stops)
FLASH DURATION 1/280 sec. at full power, 1/5800 sec. at 1/128 power
RECYCLE TIME 1.5 seconds at full power, 0.5 sec. at 1/128 power
POWER CONTROL Digital control in 0.1 or 0.5 f-stop increments
MODELING POWER 250-watt quartz ESS lamp
TRIGGERING Photo slave, Sync jack (5 Vdc), Test button, Radio
POWER SUPPLY 105–125 Vac, 60hz, 10 amp. Line voltage regulated
OVERLOAD PROTECTION 3AG type 15 amp SLO-BLO fuse, and thermal protection
POWER CONSUMPTION 0.2 amps idling, 15 amps charging
VOLTAGE STABILZATION ±0.05 f-stop
IS0 100 GUIDE NUMBER 365 w/PL7R reflector, 110 w/o reflector
COLOR TEMPERATURE 5400K; <±50K from full to 1/32 power, <±100K from full to 1/128 power
AUDIBLE ALARMS Misfire, Ready
AUTO BRACKET 0.1 f-stop to 1.5 f-stop under- and over-exposure
CONSTRUCTION Extruded aluminum housing
RELATED PRODUCTS:
Copyright 2005 Photogenic Professional Lighting. All rights reserved.
Legal Notices & Terms of Use   |   Privacy Policy
HOME | COMPANY | PRODUCTS | TESTIMONIALS | CUSTOMER SERVICE
LOCATE DEALER | CONTACT US | SITE MAP