Photogenic Professional Lighting Products - Flash Monolights - PowerLight Monolights - PLR2500DRC
PowerLight® monolights are built to meet the everyday demands of photo professionals. Their job is a lot like yours: to provide exact and repeatable results in demanding lighting situations, day in and day out.
The PLR2500DRC has a 6 f-stop flash output range from 32 to 1000Ws. The unit delivers accurate, repeatable power to the flash tube every flash, for consistent exposures. Tight control of the flash output is accomplished through a digital display that allows for precise adjustments in 1/10 or 1/2 f-stop increments. Just like the flash, the bright 250W modeling lamp can be controlled to any output level you need—full, proportional, manual or off. The flash tube is color-corrected to daylight Kelvin temperature.
You can throw away your sync cord—the PLR2500DRC has a built-in PocketWizard™ receiver. Any PocketWizard™ transmitter you use will trigger the light from a distance up to 300 feet. Plus, there’s no antenna to break off (it’s in the handle), and there are no batteries to worry about (the power comes from the light).
Professionals trust Photogenic PowerLights for rugged build, consistent output, and reliable results.
See kit options for this light at the
PowerLight Monolight Kits Page
PRINT THIS PAGE
EMAIL THIS PAGE
VIEW/ DOWNLOAD CATALOG
4.5" x 4.5" x 8.75"
32 to 1000Ws (6 f-stops)
1/770 sec. at full power, 1/345 sec. at 1/32 power
3.0 sec. at full power, 0.8 sec.at 1/32 power
Digital control in 0.1 or 0.5 f-stop increments
250-watt Quartz ESS lamp
Photo slave, Sync jack (5 Vdc), Test button, Radio
105–125 Vac, 60hz, 10 amp. Line voltage regulated.
3AG type 15 amp SLO-BLO fuse, and thermal protection
0.2 amps idling, 15 amps charging
IS0 100 GUIDE NUMBER
515 w/PL7R reflector, 160 w/o reflector
Extruded aluminum housing
© Copyright 2005 Photogenic Professional Lighting. All rights reserved.